Item on back order
0 Item Items
Warning: Last items in stock!
Key features on the FUJIFILM X100F
Fujifilm's excellent reproduction of colours and gradation of tones capture premium image quality in both stills and video recording
The X100F features the 24.3MP X-Trans™ CMOS III*1, an APS-C sensor with no low-pass filter boasting the highest performance in the history of the X Series, as well as the X-Processor Pro high-speed image processing engine to deliver outstanding colour reproduction and gradation of tones in both stills and videos with high ISO sensitivity and low noise. The Film Simulation modes, developed with Fujifilm's philosophy of colour reproduction nurtured in over 80 years of photo film research, have further evolved to capture a subject's textures, three-dimensional feel and even the atmosphere surrounding it.
Perfect for snapshots with quick response and enhanced AF performance
Basic response specifications have been enhanced to the extreme in the X100F. A start-up time of approx. 0.5 seconds, shooting interval of 0.2 seconds** , shutter release time lag of 0.01 seconds** and fastest AF of 0.08 seconds, ensure the camera operates exactly as the photographer intends.
Improvement in basic AF performance
The number of focusing points has been dramatically expanded from 49 in previous models※3 to 91 (up to 325 points). Approx. 40% of the imaging area (center area containing 49 focusing points) is covered with phase detection AF pixels to form a fast and precise phase detection AF area that can be used in a variety of scenes.
The X100F has an enhanced ability to autofocus on points of light, low-contrast objects and subjects with fine and delicate textures such as bird feathers and animal fur, which have been the weakness of phase detection AF.
The performance of contrast detection AF, covering approx. 85% of the imaging area, has also been improved. The data read speed has been doubled compared to previous models to achieve AF performance of higher speed and precision. Accurate focusing is obtained even at the low light condition of -3EV.
Six AF modes to be selected according to the type of scenes
The X100F offers AF-S for stationary subjects and AF-C for moving subjects. For both of these options, you can choose either “Single Point” or “Zone” mode for the type of focus area, as well as the “Wide / Tracking” mode, in which the camera automatically selects multiple areas for focusing. In the Single Point and Zone modes, use the Focus Lever beside the LCD monitor to instantaneously change the location and size of focus areas.
※3 Models carrying the X-TransTM CMOS II sensor and the EXR Processor II.
Evolution of the Advanced Hybrid Viewfinder
・ The X100F uses the Advanced Hybrid Viewfinder, which combines the features of an optical viewfinder (OVF) and electronic viewfinder (EVF). Operate the Viewfinder selector at the front of the camera body to instantly switch between the OVF and EVF.
・ In the Electronic Rangefinder (ERF) mode, the EVF is displayed as a small window at the bottom right corner of the optical viewfinder to facilitate accurate focusing using Focus Peaking and Digital Split Image even in the OVF. The small EVF window can display 100% field of view as well as in 2.5x and 6x magnifications. You can also check exposure and white balance in the EVF window, making it the ultimate viewfinder that provides all the benefits of the EVF while shooting photos through the OVF, which offers zero time lag and crisp view.
・ The viewfinder offers automatic real-time correction of parallax, the gap between the guide frame and actual shooting range when shooting close up. This Real Time Parallax Correction function is now applied to the focus area in addition to the guide frame to enable assured framing and focusing in the Manual Focus mode.
・ The EVF’s frame rate has been boosted to 60 fps. Even in low light, the high frame rate is maintained for easy framing in night shooting, etc.
Intuitive and practical operability and camera body with luxurious tactile feel
・ The layout of the camera’s rear face has been overhauled to concentrate most of the frequently-used buttons and dials to the right-hand side. This allows you to change the camera settings quickly while holding the camera firmly without having to take your eye off the viewfinder.
・ The X100F features the Built-In ISO Dial, which is incorporated into the Shutter Speed Dial, reminiscent of film cameras from yesteryear. You now don’t have to power on the camera to check ISO as well as aperture, shutter speed and exposure compensation settings at a glance.
・ Set the ISO Dial to “A” and select “Command” in the ISO DIAL SETTING (A) in the camera menu, to enable quick ISO adjustments with the Command Dial at the front of the camera body within the range of regular sensitivity levels from ISO200 to ISO12800 in the increment of 1/3 stops.
・ The Focus Lever is positioned on the rear side of the camera body. Use joystick-type operations in eight directions (up / down, right / left and diagonally) to instantaneously move the focus area.
|Camera Format||Crop Frame|
£ 85.00 £ 95.64
£ 51.30 -5% £ 54.00